您好!欢迎光临工博士商城!平台热线:021-80392549

flowserve阀门联系我们

产品:76    浏览:128618
您当前的位置:首页 » 新闻中心 » 福斯Flowserve G4非润滑旋塞阀
产品分类
新闻中心
福斯Flowserve G4非润滑旋塞阀
发布时间:2020-08-24        浏览次数:256        返回列表
 福斯Flowserve  G4非润滑旋塞阀

All G4 Sleeveline valves offer the proven reliability of the plug/PTFE sleeve primary seal with a fluoropolymer diaphragm secondary seal.

Main feartures:

Positive Stem Seal
The unique fluoropolymer reverse lip diaphragm provides a self-energizing dynamic stem seal where pressure activates the reverse lip to seal against the stem. It also provides a static seal by wedging against the stem with an interference fit.
Line Sealing
The compressive, wedge fit of the tapered plug with the PTFE sleeve serves as the sealing surface. The sleeve totally surrounds plug ports and seals the circumference of the plug, top and bottom. There are no cavities to accumulate product. Sealing is both upstream and downstream.
• Seal is totally independent of line pressure.
• There is no metal-to-metal contact.
• Valve remains free-turning throughout its life and never requires lubrication.
• Seal is adjustable.
• Wiping action between sleeve and plug provides for good slurry handling.
In-Line, Thru-Line Seal Adjustability
In-line seal adjustment is achieved by turning two adjuster fasteners to drive the plug deeper into the sleeve. This saves maintenance and process time because the seal is adjusted in-line and under pressure within seconds. The result is repeatable, bubble-tight shutoff performance.


分享到: 


 

联系热线:0731-88706966 联系人:周经理 联系地址:上海市宝山区富联一路98弄6号

技术和报价服务:星期一至星期六8:00-22:00 flowserve阀门